top of page

Labortech E.3 Series

< Back

E.3.jpg

E.3 – ELECTROMECHANICAL TESTING MACHINES UP TO 600KN

​

The electromechanical testing machines of the E3 series in double or four-column floortop design up to 600kN are suitable for both R & D and standard quality control in laboratories and operations. Combined with a wide range of accessories, the machine can be used safely and efficiently for testing of materials and products in tensile, pressure, bending, shear and torsion, be it plastics, metals, composites, paper, polyurethanes, etc. The models are available in ranges of 100kN, 200 – 250 kN, 300 kN, 400 kN, 500 kN and 600 kN.

KEY FEATURES OF E.3 SERIES

​

  • Robust vertical stand design with high rigidity, mechanical resistance and durability with integrated linear guide, ideal for off-axis loading.

​

  • Abnormally high rigidity and mechanical resistance of the machine combined with ergonomics at a high level.

​

  • Quiet and precise AC servo drive with low noise, high resolution with the possibility of control in the power and position loop.

​

  • The E.2 series machines comply with all the above-mentioned EC directives on machinery and equipment and work in accordance with the new safety functions according to ISO 13850:2015.

​

  • Automatic identification of sensors operating in the accuracy class according to EN ISO 7500-1, ASTM E4 with the possibility of linearization.

​

  • The machine is controlled by measuring and control electronics of the EDCi series with a sampling frequency of 2.5 or 10 kHz. Analog signal resolution level ± 250,000 divisions (20 ms).

​

  • Complete test evaluation and management is provided by Test&Motion material testing software.

​

  • Possibility to extend the frame by two or three test rooms.

​

  • High-precision tests with temperature chamber or high-temperature furnace.

         Labtest E.3 to 100 kN                        Labtest E.3 to 250 kN                      Labtest E.3 to 400 kN                         Labtest E.3 to 600 kN

bottom of page